Yet another Bottle Stopper, A Post about everything except a bottle topper

I went out to the shop last night and started to work on some tool building projects I have for my Lathe. I am in the middle of building 4 new tools rests and a nice solid rest for my grinder so I can hold turnings tools steady and grind a new edge on them. Like my Skew, it has a terrible edge and I can't seem to get a good edge on it without creating an extra edge or bevel or, this or that. One other thing worth noting is with a bad and miss aligned edge on my Skew and no real skill on how to use the skew of death. I am very good at "Catches". You know what I am talking about "Whack" and the tool jumps and some extra wood goes a flying. I have ruined and tried to recover from a number of these "Learning Experiences" lately. The other night my friend the "Turning Expert" was whittling away on a nice hard piece of Mahogany I have setup for a rolling pin. He was "Skewing" along trying to get a final edge on the pin and "Smack" goes the Skew Monster. In it's wake was a nice deep tear out. So now I must figure out how to recover from this, do I make a smaller diameter pin or try one of those French Rolling pins?

Well anyway, let me get back to the Bottle Topper. After I got lost and frustrated trying to drill and figure out how to build this grinding tools rest, I went to work on the blanks for another Purplerheart bottle topper. But before that I went to the box of new cool stuff and got out my new Harbor Freight pusher thingy for my band saw. This thingy is suppose to allow me to push wood parts through my band saw at any and all angles. Well I was so not impressed with it I can't even remember it's name. Well anyway I got it out mostly together, it's didn't seem to work and I broke the handle on it within 12 second of it's initial use. Whatever, I will lock it down at 90 degrees and try to use it. What can you expect for 13 bucks I guess, others from Delta cost $150.00 or more which is more than I paid for the band saw. So once I get the pusher thingy ready I put some purple heart on the band saw and try to make a cut. uggggg, here we go again, the blade walks to the right about 3/16 of and inch and I get a cut that looks like a 3 years make it with some plastic Disney Scissors. So what do I do, I make 3 more really bad cuts and then think to adjust the guides on my band saw. Why not really make a mess of my projects vs. fixing the tools and doing it right? Well anyway that's about the way my progress in the shop was going. So now I think to myself how do I square up the end of this blank so I can drill it and tap it? I don't have a good sander with an ability to square up the end, the chop saw is too noisy to run and it will make the blank shorter, Hmmmmm maybe I can use the lathe. So I get my fancy barracuda 4 jaws clampy thingy and go to the lathe, I try to remove the safe driver and of course have too much stuff in my hands and whack the safe driver and send it across the room because I don't catch it coming out of the lathe. Oh well, I put on the clamping jaw thing of dead and mount the purple heart blank in it a couple of times to get it centered. Now I proceed to knock off the square edges and work on the end. I get out the parting tool and before I know it something is going my way, I get the end of the blank nice and square to the whirling blank of purpleness. Nice I did something and did it right, I have only been trying for about 3 hours for a victory. Now I think time to drill it. Why don't I try my new Jacobs chuck (I remembered the name of this tool) with an MT2 taper? I find my letter O drill bit put it in the chuck and zip it onto the tail stock. Set it in position mark it for 1 inch depth and zip zam wham, I drilled the blank quick as quick. Wow 2 things going my way, alright. So I take the blank out, tap the end, and mount it on my bottle topper jig. Way to go, I am making progress, I turned the rest of the blank to a nice round and trued everything up. Then I started on a design, I had no real idea what the design was going to be but I just cut away until I got an initial ball at the base of the topper. Then I made another one above it a bit smaller and then another and another. I was thinking this was pretty cool, I was now having fun and the Jazz were in a very close game against Phoenix. Well anyway I started being careful and slowly turning the topper down to a final form. I did get a few small scrolling catches, but all went well. I sanded to 600 and thought this is looking good. Now for a finish, I have tried all kinds of finishes and am still not sure what works best. So this time I use 3 coats of the friction polish I have been using on my pens and once last coat of carnuba wax.

So in the end, The Jazz lost and I was able to pull out a win over the shop. I will live to fight another day. The final design ended up with three balls that are tear drop shapped sitting on top of each other. Not bad for a rookie.

A good guide book for getting started.

Turning Pens is not a super difficult thing to make on the lathe. I can do it so I am sure you can too. When getting started we all need a few tips, or if we are an old pro it's always a good idea to read up on something new. This is a great book authored buy two guy who can really turn. I have watched both of their videos and read this book. They biggest benefit to their book is the ability to take the simple and inexpensive slimline kit and turn it into may different styles of pens. This saves some and really helps with the creativity of this hobby.


So I recommend this book be part of you "Wood Turning Library"

Hand Turned Wine Bottle Topper

I have been able to go out and have some fun. I made two bottle toppeers, they turned out almost identical almost by accident. I know if I was trying to make two the exact same I would have ended up with tow completely different or some kind of disaster. that's just the way it goes. The second one I was trying to make here I wanted two round beads on the top end of it vs. an exact copy of the first. Well while I was cutting I kind of just followed the other ones and before I knew it I had a scooped out cove shape and a ridge and a ball on the top and they were the same. I did measure the diameters a few (well ok 20 times or more) once I decided they would end up the same.

These topper are turned using two pieces of Purpleheart wood that I laminated together. If you click on the pictures and look at the super sized version you can see the lamination line on one of them. When you are holding them and playing with them you can't really tell I used two pieces of wood. The Purple heart wood is very nice to work with it cuts cleanly and finished very nicely. One thing I have notices it when you first finish it, the color takes on a slight brown tone. Then after about a week in the sun and light it turns a deeper brighter purple color. This was something I was let down about when I finished my frist topper about a week ago. It looked brown to me, now the second one has a bit of brown in it and the first one is more purple.

Here is my second attempt at an Oak Euro Pen.

Live and learn how to turn pens with me. I am slowly learning all the trick to making a really nice pen the hard way. I started with some simple wood, White Oak and a European style kit. I like the look of the Euro which provide for a thick pen body and a fancy dressed up band in the middle of the pen on the end of the cap. For this pen we have a light wood with a bright chrome kit. I am very pleased with the color selection and the over all look of the finished pen. As I said this is my second pen and my helpers first pen so we are learning and I am not afraid to point out my learning flaws. The tip of the pen has a nice bulge but in my opinion we cut it down a bit too much and created a small scooped in spot on the pen right where the wood meets the tip. You can see it better if you click on this second picture. The other issue I had with the Euro Kit is the center band. The bushing I was using provide a two piece center band bushing. One size is for the outer cap then you turn down the spot on the pen for the band and slide the bushing over it to get the right size for the center cap to slide on to. Well It didnt' work so well. Once I turned the cap down small enough to slide the bushing over it I had gone too far. This caused my center cap to be loose when I test fit it before gluing. It was only a tiny bit small but small enough I had to use extra CA glue to get the cap to fit. This was a mistake, too much glue and it gets all of everything including the center cap. So in one of the pictures you can see what looks like a clear stain on the center band that is CA glue. It will eventually come off but it was a let down to see a very nice pen and finish get messed up at the last step.

Too much turning, no time to post here.

I have been playing with the lathe a lot. I have made 3 rolling pins, and many many pens. I ran out of pen kits and had to get a few more. I adventured into making a couple of bottle toppers as well. they turned out great but I was let down when I tried to finish the topper made from purple heart and it turned brownish on me. I wanted it bright pick purple like the wood looked without a finish. I guess I will just need to try again.